Power On and Standby
Power On To power on the BWC, press and hold the power button for a few seconds until the BWC says, "hello." The following occurs once the BWC is powered on: * The Battery Status LED will turn on (Green or Red depending on the percentage remaining). * The BWC will say, "hello." * If enabled, Pre-record will begi…
Start Recording and Mark
Start Recording To start recording, press the center button once ( single press ). The following occurs once a recording has started: * The BWC will say, " recording ." * The recording status LED will begin to blink red . * If enabled, any Pre-record ed event will be added to the recording automatical…
Categorizing Assets
Overview Once a recording has been stopped, a list of Categories will appear, prompting the User to choose which most applies to the recording. Each Category will have a corresponding Retention time for how long that Asset or Asset Group will be kept on the server before it automatically purges. The Reten…
Video Capture
Overview This screen is where the live feed from any cameras will be visible to the operator. There are several icons here that display different information depending on the status of the MVS . See the image below for an overview: Training Video Screen Controls The screen controls page allows for indepen…
Covert Mode
Overview The purpose of Covert Mode is to enable the operator to use their BWC as discreetly as possible. This is usable in a variety of situations where visual or audible notifications may negatively impact the operator. Caution: It is highly recommended that users are well accustomed to the features and func…
Login/Logout
How to Login For a User to log into the MVS , first they will need to accept the Getac EULA . This is made available to all users the first time they log into Getac Enterprise . Once that has been accepted, the EULA will never be prompted for again. Training Video Note: * Use the same credentials as…
Mute On and Off
Mute On To mute all audio being recorded, the BWC must first be recording , then the mute button must be pressed for approximately 1 second and released. The BWC will then say, " mute on ." The following occurs when a recording is muted: * Audio will no longer be recorded. * A Bookmark will be placed …
Stop Recording and Categorizing
Stop Recording To stop recording, press and hold the center button for approximately 3 seconds or until the BWC says, " stop recording ." The following occurs once a recording has stopped: * The recording status LED will turn off . * If enabled, Pre-record will begin automatically at the specified in…
Navigation
Introduction The Getac Mobile Video Solution (MVS), or in-car video system (ICV), typically includes: * A DVR, such as the VR-X20 or VR-X20 F1. * CU-D50 * A front-facing camera, such as the NF21-146, NF-22, or NF-42. * A backseat camera, such as the NF21-146IR * And optionally either a: * Wireless microphone …
Covert Mode
Power/Covert Mode Button This feature is utilized when discretion is needed during a recording or when the operator simply doesn't want the recording screen visible, e.g. at night. This feature turns off the following items*: * CU-D50 . * Backlight on the physical buttons. * Recording indicator light on the fron…
