Power On and Standby
Power On To power on the BWC, press and hold the power button for a few seconds until the BWC says, "hello." The following occurs once the BWC is powered on: * The Battery Status LED will turn on (Green or Red depending on the percentage remaining). * The BWC will say, "hello." * If enabled, Pre-record will begi…
Start Recording and Mark
Start Recording To start recording, press the center button once ( single press ). The following occurs once a recording has started: * The BWC will say, " recording ." * The recording status LED will begin to blink red . * If enabled, any Pre-record ed event will be added to the recording automatical…
Covert Mode
Overview The purpose of Covert Mode is to enable the operator to use their BWC as discreetly as possible. This is usable in a variety of situations where visual or audible notifications may negatively impact the operator. Caution: It is highly recommended that users are well accustomed to the features and func…
Mute On and Off
Mute On To mute all audio being recorded, the BWC must first be recording , then the mute button must be pressed for approximately 1 second and released. The BWC will then say, " mute on ." The following occurs when a recording is muted: * Audio will no longer be recorded. * A Bookmark will be placed …
Overview
Buttons The BC-02 BWC has several physical buttons that control different actions. See the image below for an overview of the buttons: Ex. BC-02 Buttons and Functions Note: * Certain features such as mute are configurable and may not be enabled for every customer. * Consult with an administrator for more d…
