Overview

The Getac Certified Video Installer program provides installers with information and best practices for installing Getac video systems in vehicles, including mounting DVRs, displays, cameras, antennas, and body camera docks; connecting system components; wiring DVR power and vehicle triggers; and installing integrated DVR and Bluetooth Trigger Box systems.

 

Introduction

 

Watch the video below for an in-depth overview of the key components that comprise Getac video systems:

 

 

DVR Mounting

All MVS kits come with a mounting bracket featuring a strain relief bar. This versatile bracket can be attached to either the top or bottom of the DVR, allowing for various mounting orientations, such as on a trunk roof, behind a front passenger seat, or vertically on a cage.

Caution:

Do not attach the bracket to top of the DVR unless instructed by a solutions architect. Doing so obstructs visibility of the serial number and other important information on the DVR’s label.

 

Watch the video below for how to install the bracket and mount the DVR:

 

 

Display Mounting

Customers have a variety of display mounting brackets to choose from, including vehicle-specific models and a universal bracket. The choice depends on their specific use case. The universal bracket, designed solely for mounting the display, necessitates attaching a mounting puck to the inside of a windshield using glue.

 

Watch the video below for an in-depth overview of how to install display mounting brackets:

 

 

Camera Mounting

Getac provides a range of cameras with various features for capturing digital evidence from a vehicle. Customers with vehicle-specific brackets can attach the front-facing camera to the same bracket as the 5-inch display. Alternatively, they can use a metal puck glued to the inside of the windshield. Backseat cameras offer multiple mounting options based on the vehicle's layout, with the final decision on placement resting with the customer.

 

Watch the video below for a detailed guide on installing cameras in a vehicle:

 

 

Antenna Installation

Multiple antenna options are available for in-car video systems, providing connectivity, live streaming, and location data. Third-party options include 3-in-1 and 5-in-1 antennas, while Getac offers individual Wi-Fi and GPS antennas. These solutions provide customers flexibility and choice in how they utilize their systems.

 

Watch the video below for a detailed guide on installing antennas in a vehicle:

 

 

Body Camera Vehicle Dock

Body camera docks facilitate connectivity between in-car video systems, vehicle computers, and body cameras. These docks must be securely mounted in a location that is easily accessible to the operator. Customers should collaborate with installers to determine the optimal placement for the dock within the vehicle. Note that Getac does not provide the mounting hardware, so installers need to procure this separately.

 

Watch the video below for best practices on installing body camera docks in a vehicle:

 

 

Component Connections

A DVR has multiple connection types, each designed for specific components. Understanding these differences is crucial to ensuring that each component is connected to the correct input and secured to the strain relief bar. Because customers use the system in various ways, there are multiple methods for connecting components.

 

Watch the video below for an overview of DVR component connections and best practices for their installation:

 

DVR Power Wiring

When wiring power to a DVR, it is crucial to observe the orientation of the power connector, the method of stripping the cable, and the sources of the positive, negative, and ignition connections. Wiring directly to the battery, factory breakout points, or power distribution systems is essential to avoid erroneous operation.

 

Watch the video below to learn how to wire power to DVRs correctly:

 

Wiring Triggers to a DVR

Triggers enable the automatic activation of DVR recordings. Various wiring schemes are required because each customer may use their system differently. Getac provides a wiring reference guide that clearly indicates which triggers should be wired to each GPIO input. This guide should always be consulted first to verify the work and prevent unnecessary rework. Getac is not liable for improper wiring and expects certified installers to return on-site to correct any issues.

 

Watch the video below for an overview of wiring triggers to a DVR:

 

DVR & Trigger Box Wiring

Combining DVR  and Bluetooth Trigger Box systems offers a fully integrated body camera and in-car video experience, eliminating the need for a wireless microphone. Following the wiring reference guide is essential to ensure proper functionality when installing these systems together.

 

Watch the video below for best practices and installation of the combined In-car Video and Trigger box solution:

 

 

Wiring Diagrams

Integrated Power

         

Integrated Triggers

Trigger Box Installation

The Bluetooth Trigger Box enables the wireless activation of paired body cameras via vehicle triggers, such as light bar systems. Since customer triggers can vary significantly, it's crucial to consult the wiring reference guide to ensure correct wiring. Mounting consumables like hook and loop fasteners or nuts and bolts can securely affix the trigger box to horizontal and vertical surfaces. For optimal range, install with the clear plastic facing upward.

 

Watch the video below for best practices on installing the Bluetooth trigger box:

 

 

Power Wiring Diagram