Q: How do I apply a Getac Image to our ZX70?

A: Please follow the below steps to apply a Getac Image to your ZX70:

1. Go to our Getac Driver Page
2. Put in your serial number and press Submit
3. Download the 5.1 or 6.0 Image you need
4. Unzip Downloaded Image
5. Format a Micro SD Card or USB Stick to Fat32
6. Copy all files unzipped to the SD Card/USB Stick
7. Put SD Card/USB Stick into ZX70
8. Plug USB Keyboard into the ZX70
9. Make sure AC Adapter is plugged in
10. Turn on unit from a powered off state
11. Press Esc on keyboard multiple times until you get to the Insyde Options Screen
12. Arrow down to Boot From File and press enter
13. Arrow down to your SD Card/USB Stick and press enter
14. Arrow down to installer.efi and press enter
15. Unit will start to image the unit and power down after completed
16. Once complete turn the unit on and go through initial setup