Change Version
May 09, 2024
90
Note:
This article showcases features that are typically only made available to Administrator roles.
However, since Getac Enterprise is highly configurable, the ability to complete tasks described in this article may be different for each User, depending on policy. Please contact an administrator with all access questions and concerns.
However, since Getac Enterprise is highly configurable, the ability to complete tasks described in this article may be different for each User, depending on policy. Please contact an administrator with all access questions and concerns.
Overview
This feature allows for updates to InCar software or BWC Firmware to be pushed OTA from Getac Enterprise to the device.
To change version, perform the following steps:
- Search for the desired Unit(s) from the Main Units Page.
- Check the box to the left of the desired Unit(s).
- Click on the Gear icon, then Change Version.
Caution:
The same Unit type MUST be selected.
InCar and BC-02 Units
Once the menu loads, the following items will be shown:
- Current Version - That is installed.
- Target Version - Select the desired version from the dropdown list.
Click on Save to confirm.
See the image below for an example:
BC-03 Wi-Fi and LTE
Once the menu loads, the following items will be shown:
- Firmware
- Current Version - That is installed.
- Target Version - Select the desired version from the dropdown list.
Click on Save to confirm.
See the image below for an example:
Warning:
If unsure which version to push OTA, contact [email protected] for assistance.
